Inspectin Procedure: P0088; Inspect The Start Of The Engine; Inspect The Supply Pump - Hino Motors HINO 155 series Workshop Manual

2–170
INSPECTION PROCEDURE: P0088
1

Inspect the start of the engine

Does the engine start?
Go to step 4.
2

Inspect the supply pump

SUPPLY PUMP
Was any failure found?
Replace the supply pump, and go to step 4.
ENGINE (J05E)/TROUBLESHOOTING
1. Inspect the start of the engine.
YES
1. Check if fuel is leaking or seeping out of the supply pump.
SHTS021270300157
YES
NO
Go to step 2.
NO
Go to step 3.