Vehicle Noise Emission Control Information; Engine Serial Number; Transmission Serial Number; Clean Idle Certified Label For Us - Hino Motors HINO 155 series Workshop Manual

GENERAL INTRODUCTION/SAFETY INSTRUCTIONS AND READINESS TO WORK
FOR ALL MODELS
A
A
2.

VEHICLE NOISE EMISSION CONTROL INFORMATION

• The Vehicle Noise Emission Control Information is affixed to the
SHTS01ZZZ0300008
3.

ENGINE SERIAL NUMBER

(1)
SHTS01ZZZ0300009
4.

TRANSMISSION SERIAL NUMBER

(1)
SHTS01ZZZ0300010
5. CLEAN IDLE CERTIFIED LABEL FOR U.S.
• Make sure that the following clean engine idling certified label is
SHTS01ZZZ0300011
left pillar of the cab. The name of manufacturer, production year
and month, and noise emission applicable to medium and heavy
trucks in conformity with U.S. EPA Regulations are displayed.
The engine serial number is stamped on the cylinder block,
as shown in the illustration.
A: J05E
The transmission serial number is stamped on the transmis-
sion, as shown in the illustration.
A: A465
affixed to the outside of the left door. By the CARB below, the
label must be affixed there to prove that the new vehicle with
diesel engine manufactured from Jan., 2008 conforms to this
low.
CARB § 1956.8. Exhaust Emission Standard and Test
Procedure (a) (b) Heavy-Duty Diesel Engine Idling
Requirements
1–11