Inspect Disconnection Of The Differential Pressure Sensor Harness - Hino Motors HINO 155 series Workshop Manual

6

Inspect disconnection of the differential pressure sensor harness

B
V70
V71
V46
B
Do the measurements meet the standard value?
Go to step 7.
ENGINE (J05E)/TROUBLESHOOTING
1. Connect the differential pressure sensor connector.
2. Use the electrical tester to measure the resistance between the
terminals of the engine ECU (signal check harness).
Starter key: LOCK
V70
SHTS021270300683
YES
Measurement Tester
conditions connections
Engine ECU (sig-
nal check har-
ness)
VCP1 (V71) – PEX
(V70)
EP1 (V46) – PEX
(V70)
Repair or replace the harness.
Perform "After-inspection work" of INFOR-
MATION section.
2–753
Standard values
2 – 15 k
NO