2–396
10
Check the valve clearance
Rocker arm
Cylinder number
Valve arrangement
No.1 cylinder at the compres-
sion stroke top dead center
No.4 cylinder at the compres-
sion stroke top dead center
Do the measurements meet the standard value?
Go to step 11.
ENGINE (J05E)/TROUBLESHOOTING
1.
Check that the valve clearance of each cylinder is within the stan-
dard values. (Check all the valves.)
Feeler gauge
Cold engine
Cross head
SHTS021270300357
1
Intake
Exhaust
YES
Measurement conditions
2
Intake
Exhaust
Intake
Δ
Δ
Adjust the valve clearance.
Perform "After-inspection work" of INFOR-
MATION section.
Standard values
Intake valve:
0.3 mm (0.0118 in.)
Exhaust valve:
0.45 mm (0.0177 in.)
3
4
Exhaust
Intake
Exhaust
Δ
NO
Δ