Hino Motors HINO 155 series Workshop Manual page 150

2–114
5. Symptoms on the vehicle when the DTC is set
<Symptoms on the vehicle due to backup control (fail safe function)>
• –
<Symptoms on the vehicle due to malfunction>
• –
6. Pre-inspection work
• Check that the battery voltage is in the normal range.
7. After-inspection work
• Clear all past DTCs.
• Check that no DTC is detected after test drive.
8. Estimated failure factors
Camshaft gear: Check assembly.
Flywheel: Check for miss assembly.
Engine speed main sensor (crankshaft position sensor): Check the installation position.
Engine speed sub sensor (camshaft position sensor): Check the installation position.
ENGINE (J05E)/TROUBLESHOOTING