Linking - ABB RTC-F-1.PB Technical Manual

Room temperature controller

Table of Contents

ABB-free@home

7.3

Linking

The room temperature controllers created via the allocation function can now be

linked with binary inputs or heating actuators.

The linking in the list view is then made via the linking function of

the Web-based user interface of the System Access Point.

7.3.1

Linking the room temperature controller with an actuator

Fig. 10: Linking the room temperature controller with an actuator

To link the room temperature controller with an actuator, first click on the

desired room temperature controller [1] which is to operate the actuator and

then on the actuator [2].

Press the tick at the bottom right to take over your entries.

A blue connecting line indicates the link between the two devices.

The configuration is now transmitted automatically to the devices. The

transmission can (depending on the number of affected devices) take a

number of seconds. During the transmission a progress bar is displayed

around the devices affected.

Technical Manual 1473-1-8574

Commissioning

Room Temperature Controller

│19

Table of Contents