Reset Counters Interface Virtual-Ethernet - HP MSR series Command Reference Manual

undo remark atm-clp
Default
The action of marking the CLP flag bit of ATM cells is not configured.
Views
Traffic behavior view
Default command level
2: System level
Parameters
atm-clp-value: Specifies the value of the CLP bit in an ATM cell. The value of this argument is 0 or 1. When
congestion occurs, ATM cells with CLP 1 are dropped preferentially.
Usage guidelines
A QoS policy that references the behavior can be applied only to the outgoing traffic of an ATM PVC.
For more information about green, red, and yellow packets, see ACL and QoS Configuration Guide.
Examples
# Create a traffic behavior named database and configure the action of setting the CLP bit of ATM cells
to 1 for the traffic behavior.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark atm-clp 1

reset counters interface virtual-ethernet

Use reset counters interface virtual-ethernet to clear the statistics of Layer 3 VE interfaces.
Syntax
reset counters interface [ virtual-ethernet [ interface-number ] ]
Views
User view
Default command level
2: System level
Parameters
interface-number: Specifies the Layer 3 VE interface number.
Usage guidelines
To collect traffic statistics for a specified period of time on an interface, clear the old statistics first.
Without the virtual-ethernet keyword specified, this command clears the statistics of all interfaces
•
on the device.
If you specify the virtual-ethernet keyword without the interface-number argument, this command
•
clears the statistics of all Layer 3 VE interfaces.
Examples
# Clear the statistics of interface Virtual-Ethernet 1.
<Sysname> reset counters interface virtual-ethernet 1
228