HP MSR series Command Reference Manual page 217

Parameters
interface-type interface-number: Specifies an interface by its type and number.
pvc-name: PVC name, a unique string of 1 to 16 characters on the specified ATM interface,
case-insensitive. The name cannot be the same as any valid VPI/VCI pair. For example, the name 1/20
is not allowed.
vpi/vci: VPI/VCI pair. VPI is short for virtual path identifier. The value range is 0 to 255. VCI is short for
virtual channel identifier. The value range varies by interface type. As VCIs from 0 to 31 are reserved for
special purposes, do not use them in normal cases. For more information about the value range,
see Table 38.
Table 38 VCI range for each type of ATM interface
Interface type
ADSL 2+
G.SHDSL
ATMOC3
ATM E1
ATM T1
ATM E3
ATM T3
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no ATM interface is specified, the PVC mapping information of all ATM interfaces is displayed.
If an ATM interface is specified but no PVC or VPI/VCI pair is specified, the PVC mapping information
of all PVCs on the specified ATM interface is displayed.
Examples
# Display the PVC mapping information of all ATM interfaces.
<Sysname> display atm map-info
Atm1/0, PVC 1/32, PPP, Virtual-Template10, UP
Atm1/0, PVC 1/33, IP & Mask, State UP
100.11.1.1, mask 255.255.0.0, vlink 1
Atm1/0, PVC 2/101, ETH, Virtual-Ethernet1, UP
Table 39 Command output
Field
ATM1/0
VCI
0 to 255
0 to 255
0 to 1023
0 to 511
0 to 511
0 to 1023
0 to 1023
Description
Interface number.
205