Display Dlsw Ethernet-Backup Map - HP MSR series Command Reference Manual

Usage guidelines
If you execute this command on a primary router, this command displays information about virtual circuits
established by the primary router and the virtual circuits that all the secondary routers request. If you
execute this command on a secondary router, this command displays information about the virtual
circuits that the secondary router requests and are successfully established.
Examples
# Display virtual circuit information after the Ethernet redundancy function is enabled.
<Sysname> display dlsw ethernet-backup circuit
Self 0010-c56c-8707
Remote-MAC
0020-357b-e065
00e0-a1b2-2d82
Neighbor 0020-e065-c287
Remote-MAC
0020-357c-e085
Table 50 Command output
Field
Self
Neighbor
Remote-MAC
Local-MAC
RSAP
LSAP

display dlsw ethernet-backup map

Use display dlsw ethernet-backup map to display the MAC address conversion information after the
Ethernet redundancy function is enabled.
Syntax
display dlsw ethernet-backup map [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
Local-MAC
0000-1738-6dfd
0000-1738-6dfd
Local-MAC
0000-1720-6dee
243
RSAP LSAP
4 4
5 5
RSAP LSAP
4 4
Description
Local device.
Neighbor device.
MAC address of the remote SNA device.
MAC address of the local SNA device.
SAP of the remote SNA device.
SAP of the local SNA device.