Link-Protocol X25 - HP MSR series Command Reference Manual

Views
Any view
Default command level
2: System level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display XOT connection information.
<Sysname> display x25 xot
SVC 1024:
tcp peer ip: 10.1.1.1, peer port: 1998
tcp local ip: 10.1.1.2, local port: 1024
socket keepalive period: 5, keepalive tries: 3
come interface name: Serial2/0-10.1.1.1-1024
go interface name: Serial2/0
Related commands
x25 switch svc xot
•
x25 xot pvc
•

link-protocol x25

Use link-protocol x25 to enable X.25 encapsulation on the specified interface.
Syntax
link-protocol x25 [ dce |dte ] [ ietf | nonstandard ]
Default
The link-layer protocol for the interface is PPP. When the interface uses X.25 protocol, it operates in DTE
IETF mode by default.
Views
Interface view
Default command level
2: System level
Parameters
dce: Specifies the DCE mode.
dte: Specifies the DTE mode.
ietf: Encapsulates IP or other network protocols on the X.25 network according to IETF RFC 1356.
( ESTAB )
346