Display Interface Dialer - HP MSR series Command Reference Manual

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the DCC-related information about all the DCC interfaces.
<Sysname> display dialer
Dialer0 - dialer type = Dialer
Dialer Route:
NextHop_address
Dialer number
Dialer Timers(Secs):
Auto-dial:300
Idle:120
Total Channels:1
Table 33 Command output
Field
dialer type
NextHop address
Dialer_Numbers
Dialer number
Dialer Timers(Secs)
Auto-dial
Compete
Enable
Idle
Wait-for-carrier
Total Channels
Free Channels

display interface dialer

Use display interface dialer to display the information about a dialer interface.
Syntax
display interface dialer number [ brief ] [ | { begin | exclude | include } regular-expression ]
display interface [ dialer ] [ brief [ down ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Dialer_Numbers
003
Compete:20
Wait-for-Carrier:60
Free Channels:1
Description
Type of dialup interface, dialer or physical.
Remote address associated with a dialer route on the interface.
Dial strings for the remote IP addresses.
Dial string for a remote IP address.
DCC timers.
Timer set by the dialer timer autodial command.
Timer set by the dialer timer compete command.
Timer set by the dialer timer enable command.
Timer set by the dialer timer idle command.
Timer set by the dialer timer wait-carrier command.
Total number of channels on the interface.
Number of free channels.
Enable:5
182