Mfr Timer Hello; Mfr Window-Size - HP MSR series Command Reference Manual

<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol fr mfr 4
[Sysname-Serial2/0] mfr timer ack 6
Related commands

mfr timer hello

•
mfr retry
•
mfr timer hello
Use mfr timer hello to set the interval at which a frame relay bundle link sends hello messages.
Use undo mfr timer hello to restore the default.
Syntax
mfr timer hello seconds
undo mfr timer hello
Default
A frame relay bundle link sends hello message at the interval of 10 seconds.
Views
Frame relay interface view
Default command level
2: System level
Parameters
seconds: Interval (in seconds) for a bundle link to send hello message, in the range 1 to 180.
Usage guidelines
Before configuring this command, make sure that you have used the link-protocol fr mfr command to
associate the frame relay bundle link interface with a frame relay bundle.
Examples
# Set the bundle link Serial 2/0 to send hello message once every 15 seconds.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol fr mfr 4
[Sysname-Serial2/0] mfr timer hello 15

mfr window-size

Use mfr window-size to configure the number of fragments that can be held by the window used in
sliding window algorithm when multilink frame relay reassembles received fragments.
Use undo mfr window-size to restore the default.
Syntax
mfr window-size number
153