Llc2 Max-Send-Queue; Llc2 Max-Transmission - HP MSR series Command Reference Manual
Layer 2 wan
Hide thumbs
Also See for MSR series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
llc2 max-send-queue
Use llc2 max-send-queue to configure the length of the LLC2 output queue.
Use undo llc2 max-send-queue to restore the default.
Syntax
llc2 max-send-queue length
undo llc2 max-send-queue
Default
The length of the LLC2 output queue is 50.
Views
Ethernet interface view
Default command level
2: System level
Parameters
length: Length of the LLC2 output queue, in the range of 20 to 200.
Examples
# Set the length of the LLC2 output queue to 30 on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 max-send-queue 30
llc2 max-transmission
Use llc2 max-transmission to configure the number of LLC2 transmission retries
Use undo llc2 max-transmission to restore the default.
Syntax
llc2 max-transmission retries
undo llc2 max-transmission
Default
The number of LLC2 transmission retries is 3.
Views
Ethernet interface view
Default command level
2: System level
Parameters
retries: LLC2 transmission retries in the range of 1 to 255.
Examples
# Set the number of LLC2 transmission retries to 10 on Ethernet 1/0.
265
Advertisement
Table of Contents
