Isdn Bri-Slipwnd-Size - HP MSR series Command Reference Manual

undo isdn bch-select-way
Views
ISDN interface view
Default command level
2: System level
Parameters
ascending: Selects B channels in ascending order.
descending: Selects B channels in descending order.
Usage guidelines
When operating in B channel local management mode, the device selects B channels in ascending order
by default.
Examples
# Configure B channel selection method on interface BRI 2/0 to descending order.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn bch-select-way descending

isdn bri-slipwnd-size

Use isdn bri-slipwnd-size to set the sliding window size on a BRI interface.
Use undo isdn bri-slipwnd-size to restore the default sliding window size on the BRI interface.
Syntax
isdn bri-slipwnd-size window-size
undo isdn bri-slipwnd-size [ window-size ]
Default
The sliding window size on BRI interfaces is 1.
Views
ISDN BRI interface view
Default command level
2: System level
Parameters
window-size: Sliding window size in the range of 1 to 7.
Examples
# Configure the sliding window size on interface BRI 1/0 as 7.
<Sysname> system-view
[Sysname] interface bri 1/0
[Sysname-Bri1/0] isdn bri-slipwnd-size 7
75