Reset X25 Vc; Reset Xot - HP MSR series Command Reference Manual
Layer 2 wan
Hide thumbs
Also See for MSR series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
Examples
# Clear the X.25 statistics for interface Serial 2/0.
<Sysname> reset x25 counters interface serial 2/0
reset x25 vc
Use reset x25 vc to clear X.25 virtual circuits on the specified interface.
Syntax
reset x25 vc interface interface-type interface-number [ vc-number ]
Views
User view
Default command level
2: System level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vc-number: Virtual circuit number of a PVC or SVC, in the range 1 to 4095.
Usage guidelines
If a PVC is specified, this command resets the PVC.
If an SVC is specified, this command deletes the SVC.
Examples
# Clear the X.25 virtual circuits on interface Serial 2/0.
<Sysname> reset x25 vc interface serial 2/0
reset xot
Use reset xot to clear an XOT connection for SVC.
Use reset xot to reset an XOT connection for PVC.
Syntax
reset xot local local-ip-address local-port remote remote-ip-address remote-port
Views
User view
Default command level
2: System level
348
Advertisement
Table of Contents
