pppoe-server bind
Use pppoe-server bind to enable PPPoE on an Ethernet interface and bind the Ethernet interface to a
virtual-template interface.
Use undo pppoe-server bind to disable PPPoE on an Ethernet interface.
Syntax
pppoe-server bind virtual-template number
undo pppoe-server bind
Default
PPPoE is disabled.
Views
Interface view
Default command level
2: System level
Parameters
virtual template number: Specifies a virtual-template interface number in the range of 0 to 1023.
Examples
# Enable PPPoE on interface Ethernet 1/1 and bind the Ethernet interface to Virtual-template 1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] pppoe-server bind virtual-template 1
pppoe-server log-information off
Use pppoe-server log-information off to disable PPP log displaying on a device operating as a PPPoE
server.
Use undo pppoe-server log-information off to restore the default.
Syntax
pppoe-server log-information off
undo pppoe-server log-information off
Default
PPP log displaying is enabled on a PPPoE server.
Views
System view
Default command level
2: System level
55