HP MSR series Command Reference Manual page 221
Layer 2 wan
Hide thumbs
Also See for MSR series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Table 42 Command output
Field
VPI
VCI
INDEX
AAL5 Encaps
Protocol
Service-type
Transmit-Priority
OAM interval
OAM retry interval
OAM retry count
OAM ais-rdi count
input pkts:
input bytes:
input pkt errors:
output pkts
output bytes
output pkt errors
Interface State
PVC State
Output queue
OAM cells received
F5 InEndloop
F5 InAIS
F5 InRDI
OAM cells sent
F5 OutEndloop
OAM AIS State
OAM RDI State
Description
Virtual path identifier of the specified ATM PVC.
Virtual channel identifier of the specified ATM PVC.
Internal index of the PVC.
AAL5 encapsulation type of the PVC.
Upper layer protocol running on the PVC.
Service type.
Transmit priority.
Interval at which OAM F5 loopback cells are sent.
Interval at which the system retransmits OAM F5 loopback cells.
Number of OAM cells transmitted before a PVC is declared up or down.
Number of OAM AIS/RDI cells for the device to receive before reporting that the
PVC is down. Number of seconds for the device to wait before reporting that the
PVC is up after the PVC has stopped receiving OAM AIS/RDI cells.
Count of received packets.
Count of received bytes.
Count of received error packets.
Count of transmitted packets.
Count of transmitted bytes.
Count of transmitted error packets.
Link layer protocol status of the interface.
PVC status.
Information about each output queue on the PVC.
Count of received OAM cells.
Count of received F5 loopback cells.
Count of received AIS cells.
If the AIS alarm state is not supported, this command displays only the count of
AIS cells, not the AIS alarm state, which is the OAM AIS State field.
Count of received RDI cells.
If the RDI alarm state is not supported, this command displays only the count of
RDI cells, not the RDI alarm state, which is the OAM RDI State field.
Count of transmitted OAM cells.
Count of transmitted F5 loopback cells.
AID alarm state.
If the AIS alarm state is supported, this command displays only the AIS alarm
state, not the count of received AIS cells, which is the F5 InAIS field.
If the RDI alarm state is supported, this command displays only the RDI alarm
state, not the count of received RDI cells, which is the F5 InRDI field.
209
Advertisement
Table of Contents
