Reset Attack-Defense Statistics Interface; Signature-Detect - HP HSR6600 Command Reference Manual

reset attack-defense statistics interface

Use reset attack-defense statistics interface to clear the attack protection statistics of an interface.
Syntax
reset attack-defense statistics interface interface-type interface-number
Views
User view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Examples
# Clear the attack protection statistics of interface GigabitEthernet 3/0/1.
<Sysname> reset attack-defense statistics interface gigabitethernet 3/0/1
Related commands
display attack-defense statistics interface

signature-detect

Use signature-detect to enable signature detection of a single-packet attack.
Use undo signature-detect to disable signature detection of a single-packet attack.
Syntax
signature-detect { fraggle | icmp-redirect | icmp-unreachable | land | large-icmp | route-record |
smurf | source-route | tcp-flag | tracert | winnuke } enable
undo signature-detect { fraggle | icmp-redirect | icmp-unreachable | land | large-icmp | route-record
| smurf | source-route | tcp-flag | tracert | winnuke } enable
Default
Signature detection of all type of attacks is disabled.
Views
Attack protection policy view
Default command level
2: System level
Parameters
fraggle: Specifies the Fraggle packet attack.
icmp-redirect: Specifies the ICMP redirect packet attack.
icmp-unreachable: Specifies the ICMP unreachable packet attack.
land: Specifies the Land packet attack.
large-icmp: Specifies the large ICMP packet attack.
486