Display Dlsw Information - HP MSR series Command Reference Manual

Self
Neighbor
Table 52 Command output
Field
Role
Status
LLC2-Circuit

display dlsw information

Use display dlsw information to display DLSw capabilities exchange information.
Syntax
display dlsw information [ ip-address | local ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ip-address: Specifies the IP address of the remote peer to display its capabilities.
local: Displays the capabilities of the local peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The command output describes the conditions of DLSw virtual circuits. If no peer is specified, the
command displays the capabilities of all remote peers.
Examples
# Display the capabilities of all DLSw remote peers.
<Sysname> display dlsw information
DLSw: 1.1.1.2
000f.e200.0002 Master
000f.e21d.053b Slave
----
CONNECT
Description
Device role:
•
Self—Local device.
•
Neighbor—Neighbor device.
Device status:
•
Master.
•
Slave.
LLC2 link status:
•
CONNECT—Connected.
•
DISCONNECT—Disconnected.
Vendor ID (OUI)
245
: 00.0f.e2