Ppp Pfc Local - HP MSR series Command Reference Manual

Use undo ppp pap local-user to cancel the local username and password configured.
Syntax
ppp pap local-user username password { cipher | simple } password
undo ppp pap local-user
Default
The username and the password for PAP authentication are not set.
Views
Interface view
Default command level
2: System level
Parameters
username: Username of the local device for PAP authentication, a case-sensitive string of 1 to 80
characters.
cipher: Sets a ciphertext password.
simple: Sets a plaintext password.
password: Specifies the password string for PAP authentication. If simple is specified, it must be a string
of 1 to 48 characters. If cipher is specified, it must be a ciphertext string of 1 to 97 characters.
Usage guidelines
For the local device to pass PAP authentication on the remote device, make sure that the same username
and password configured for the local device are also configured on the remote device with the
commands local-user username and password { cipher | simple } password.
For security purposes, all passwords, including passwords configured in plain text, are saved in cipher
text to the configuration file.
Examples
# Configure the local username and password for PAP authentication to plaintext passwords user1 and
pass1.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ppp pap local-user user1 password simple pass1
Related commands
local-user (Security Command Reference)
•
• password (Security Command Reference)

ppp pfc local

Use ppp pfc local to configure the local end to send PFC requests, that is, configure the local end to
include the PFC option in its outbound LCP negotiation requests.
Use undo ppp pfc local to configure the local end to exclude the PFC option from its outbound LCP
negotiation requests.
14