Ppp Mp Lfi Size-Per-Frag; Reset Ppp Compression Iphc - HP MSR series Command Reference Manual
Layer 2 wan
Hide thumbs
Also See for MSR series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
[Sysname-Virtual-Template1] ppp mp lfi delay-per-frag 20
ppp mp lfi size-per-frag
Use ppp mp lfi size-per-frag to set the maximum size (in bytes) of LFI fragments.
Use undo ppp mp lfi size-per-frag to restore the default.
Syntax
ppp mp lfi size-per-frag size
undo ppp mp lfi size-per-frag
Default
The size of LFI fragments depends on the configuration of the ppp mp lfi delay-per-frag command.
Views
Virtual template interface view, MP-group interface view, dialer interface view
Default command level
2: System level
Parameters
size: Maximum size of an LFI fragment, in the range of 40 to 1500 bytes.
Examples
# Configure the maximum size of LFI fragments on interface Virtual-Template 1 as 80 bytes.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp mp lfi size-per-frag 80
reset ppp compression iphc
Use reset ppp compression iphc to clear the IP header compression statistics on an interface.
Syntax
reset ppp compression iphc [ interface-type interface-number ]
Views
User view
Default command level
1: Monitor level
Parameters
Interface-type Interface-number: Interface type and interface number.
Usage guidelines
If the interface-type interface-number argument is not provided, this command clears the IP header
compression statistics on all interfaces.
Examples
# Clear the IP header compression statistics on all interfaces.
50
Advertisement
Table of Contents
