HP MSR series Command Reference Manual page 326

Usage guidelines
If you do not specify the bridge-template keyword, this command displays information about all
interfaces.
If you specify the bridge-template keyword without any bridge-template interface number, this command
displays information about all bridge-template interfaces.
Examples
# Display detailed information about bridge-template 1.
<Sysname> display interface bridge-template 1
Bridge-template1 current state: UP
Line protocol current state: UP
Description: Bridge-template1 Interface
The Maximum Transmit Unit is 1500
Internet Address is 2.0.0.1/30 Primary
Internet Address is 2.0.0.2/30 Sub
IP Packet Frame Type: PKTFMT_ETHNT_2,
IPv6 Packet Frame Type: PKTFMT_ETHNT_2,
Last clearing of counters:
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
# Display brief information about bridge-template 1.
<Sysname> display interface bridge-template 1 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
Bridge1
# Display brief information about all bridge-template interfaces in the DOWN state.
<Sysname> display interface bridge-template brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface
Bridge2
Table 64 Command output
Field
current state
Line protocol current state
Description
The Maximum Transmit Unit
Hardware Address: 000f-e207-f301
Never
Link Protocol Main IP
UP UP --
Link Cause
ADM Administratively
Description
Physical state of the bridge-template interface:
•
UP—The interface is physically up.
•
DOWN (Administratively)—The interface has been shut down with the
shutdown command and the interface is administratively down. To bring
it up, use the undo shutdown command.
State of the data link layer protocol (UP/DOWN).
Descriptive string of the interface.
MTU of the interface.
314
Hardware Address: 000f-e200-1234
Description