Isdn Ignore Llc - HP MSR series Command Reference Manual
Layer 2 wan
Hide thumbs
Also See for MSR series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Use undo isdn ignore hlc to configure ISDN to carry the HLC information element in SETUP messages.
Syntax
isdn ignore hlc
undo isdn ignore hlc
Default
HLC information element is carried in SETUP messages when placing voice calls.
Views
ISDN interface view
Default command level
2: System level
Usage guidelines
In the event that the router is communicating with an ISDN switch, its settings must be the same as those
on the switch.
You are not allowed to configure this command on an ISDN interface if a call still exists on it. This
command can take effect only if it is configured when no call exists on the interface. Alternatively, you
can manually disable the interface by executing the shutdown command, configure the command, and
then enable the interface by executing the undo shutdown command. The operations, however, will lead
to the disconnection of the call existing on the interface.
Examples
# Configure ISDN to carry the HLC information element in the SETUP messages for the voice calls placed
on the BRI interface 2/0.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn ignore hlc
isdn ignore llc
Use isdn ignore llc to disable ISDN from carrying the lower layer compatibility (LLC) information element
in the SETUP messages sent when placing voice calls.
Use undo isdn ignore llc to configure ISDN to carry the LLC information element in SETUP messages.
Syntax
isdn ignore llc
undo isdn ignore llc
Default
LLC information element is carried in SETUP messages when placing voice calls.
Views
ISDN interface view
Default command level
2: System level
82
Advertisement
Table of Contents
