Display Mfr - HP MSR series Command Reference Manual

Field
Link
Protocol
Main IP
Description
Cause

display mfr

Use display mfr to display configuration and statistics information of the specified multilink frame relay
bundle and bundle link.
Syntax
display mfr [ interface interface-type interface-number | verbose ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. The specified
interface must be a main interface.
verbose: Displays detailed statistics information, including the number of controlling packets sent and
received.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither interface nor verbose is specified, this command displays the brief information of all main
interfaces.
Description
Physical link state of the interface:
•
UP—The link is up.
•
ADM—The link has been administratively shut
down. To recover its physical state, perform the
undo shutdown command.
Protocol connection state of the interface.
Main IP address of the interface.
Description of the interface.
Cause of a DOWN physical link. If the port has been
shut down with the shutdown command, this field
displays Administratively. To restore the physical state
of the interface, use the undo shutdown command.
144