default
Use default to restore the default settings for a bridge-template interface.
Syntax
default
Views
Bridge-template interface view
Default command level
2: System level
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. Use the display this command in interface view to identify these
commands, and then use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message instructions to resolve the
problem.
Examples
# Restore the default settings for interface Bridge-template 1.
<Sysname> system-view
[Sysname] interface bridge-template 1
[Sysname-Bridge-template1] default
This command will restore the default settings. Continue? [Y/N]:y
description
Use description to configure a description string for the bridge-template interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description string of an interface is interface name Interface, for example, Bridge-template1
Interface.
Views
Bridge-template interface view
Default command level
2: System level
308