Reset Fr Pvc; Shutdown - HP MSR series Command Reference Manual

Views
User view
Default command level
2: System level
Usage guidelines
In some special cases, for example, when the network topology changes, the dynamic address maps
originally established will become invalid. You must establish them again. You can use this command to
clear all the dynamic address maps.
Examples
# Clear all the frame relay dynamic address maps.
<Sysname> reset fr inarp
Related commands
fr inarp

reset fr pvc

Use reset fr pvc to clear the statistics on a PVC.
Syntax
reset fr pvc interface serial interface-number [ dlci dlci-number ]
Views
User view
Default command level
1: Monitor level
Parameters
interface-number: Interface number.
dlci dlci-number: Specifies the DLCI to be assigned to an FR interface, in the range 16 to 1007. DLCI 0
through 15 and 1008 through 1023 are reserved for special use and are unavailable.
Examples
# Clear PVC statistics on Serial 2/0.
<Sysname> reset fr pvc interface serial 2/0

shutdown

Use shutdown to disable the current switching PVC.
Use undo shutdown to enable the current switching PVC.
Syntax
shutdown
undo shutdown
132