Reset Etofr Translate - HP MSR series Command Reference Manual

ip-address ip-address1: Specifies a remote IP address of the interface specified by interface-type1
interface-number1.
ip-address2: Specifies a remote IP address of the FR interface specified by interface-type2
interface-number2. It must be located on the same network segment as ip-address1.
Examples
# Create an EtoFR translation mapping to map Ethernet 1/1 to Serial 2/0.
<Sysname> system-view
[Sysname] etofr translate interface ethernet 1/1 serial 2/0 dlci 30 ip-address 10.1.1.1
10.1.1.10
Related commands
display etofr translate

reset etofr translate

Use reset etofr translate to clear the translation statistics for the EtoFR translation entry for the specified
interface or all EtoFR translation entries if no interface is specified.
Syntax
reset etofr translate [ interface interface-type interface-number ]
Views
User view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. It can only be a
Layer 3 Ethernet interface, Ethernet subinterface, or VLAN interface.
Examples
# Clear the translation statistics for the EtoFR entry for interface Ethernet 1/1.
<Sysname> reset etofr translate interface ethernet 1/1
Related commands
display etofr translate
327