Isdn Link-Mode - HP MSR series Command Reference Manual

Table 14 Description of Q931 timers
timer-name
t301
t302
t303
t304
t305
t308
t309
t310
t313
t316
t322
Usage guidelines
Table 14 lists the defaults of the DSS1 ISDN protocol L3 timers. For the defaults of the L3 timers in any
other ISDN protocol, perform the display isdn parameters command.
Examples
# Set the time-out value of the L3 timer T301 on the interface BRI 2/0 to 160 seconds.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] isdn l3-timer t301 160

isdn link-mode

Use isdn link-mode p2p to configure a BRI interface to operate in point-to-point mode.
Use undo isdn link-mode to restore the default BRI interface operating mode.
Syntax
isdn link-mode p2p
undo isdn link-mode
Default
A BRI interface operates in point-to-multipoint mode, in which a BRI interface operating on the network
side can have multiple end devices attached to it.
Views
ISDN BRI interface view
Default command level
2: System level
Timer-name
T301
T302
T303
T304
T305
T308
T309
T310
T313
T316
T322
85
Time-out value range
(in seconds)
30 to 1200
1 to 60
2 to 10
10 to 60
4 to 30
2 to 10
10 to 180
10 to 180
2 to 10
20 to 180
2 to 10
Default (in seconds)
240
15
4
30
30
4
90
40
4
120
4