Ppp Mp Endpoint - HP MSR series Command Reference Manual

undo ppp mp binding-mode
Default
MP binding is performed by both PPP authentication username and endpoint descriptor.
Views
Virtual template interface view, dialer interface view
Default command level
2: System level
Parameters
authentication: Performs MP binding by PPP authentication username.
both: Performs MP binding by both PPP authentication username and endpoint descriptor.
descriptor: Performs MP binding by endpoint descriptor.
Usage guidelines
The PPP authentication username is the peer username received when performing PAP, CHAP, MS-CHAP,
or MS-CHAP-V2 authentication. The endpoint descriptor, which uniquely identifies a device, refers to the
one received during LCP negotiation. Based on the username or endpoint descriptor, the system can
locate the corresponding VT interface and then create an MP binding according to the template.
In endpoint descriptor-based MP bindings, users cannot be differentiated. To bind users to different
bundles, use the keyword both in the command.
In authentication username-based MP bindings, peer devices cannot be differentiated. When multiple
peer devices exist, use the keyword both in the command.
Examples
# Specify to perform MP binding by PPP authentication username.
<Sysname> system-view
[Sysname] interface dialer 0
[Sysname-Dialer0] ppp mp binding-mode authentication
Related commands
ppp mp user

ppp mp endpoint

Use ppp mp endpoint to configure the endpoint descriptor for LCP negotiation on an interface associated
with a VT interface.
Use undo ppp mp endpoint to restore the default endpoint descriptor.
Syntax
ppp mp endpoint string char-string
undo ppp mp endpoint
Default
If the interface is assigned to an MP group by using the ppp mp mp-group command, the endpoint
descriptor of the interface is the MP group interface name.
31