Ppp Mp Fragment Enable - HP MSR series Command Reference Manual

If the interface is associated with a virtual template, the endpoint descriptor of the interface is the device
name (configured by the sysname command).
If the endpoint descriptor exceeds 20 bytes, the first 20 bytes are taken as the endpoint descriptor.
Views
Interface view
Default command level
2: System level
Parameters
string char-string: Specifies the endpoint descriptor in the Endpoint option field. The char-string argument
is a string of 1 to 20 characters.
Usage guidelines
This command is valid only for interfaces associated with a virtual template.
In the virtual template approach to MP, an MP endpoint bases its link bundling decisions on the remote
endpoint descriptors of links, and assigns the links that receives the same endpoint descriptor to the same
bundle. To avoid incorrect link bundling on a virtual template, make sure that the link descriptors used by
different negotiating devices are unique. For example, you must re-configure an endpoint descriptor if the
default endpoint descriptor (device name) cannot uniquely identify the MP bundle at the remote end for
the device.
In the MP-group approach to MP, the negotiating endpoints do not base their bundling decisions on the
endpoint descriptor. The endpoint descriptors of the interfaces in an MP-group are always the same as
the MP-group interface name.
Examples
# Configure the endpoint descriptor of Serial 2/0 as 123456 for LCP negotiation.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ppp mp endpoint string 123456

ppp mp fragment enable

Use ppp mp fragment enable to enable MP fragmentation.
Use undo ppp mp fragment enable disable MP fragmentation.
Syntax
ppp mp fragment enable
undo ppp mp fragment enable
Default
MP fragmentation is enabled.
Views
Virtual template interface view, dialer interface view, MP-group interface view
Default command level
2: System level
32