Reset Bridge Traffic; Reset Counters Interface - HP MSR series Command Reference Manual

reset bridge traffic

Use reset bridge traffic to clear the bridged traffic statistics.
Syntax
reset bridge traffic [ bridge-set bridge-set | dlsw | interface interface-type interface-number ]
Views
User view
Default command level
1: Monitor level
Parameters
bridge-set bridge-set: Clears bridged traffic statistics in the specified bridge set. The bridge-set argument
must be an integer in the range of 1 to 255.
dlsw: Clears the bridged traffic statistics of the DLSw module.
interface interface-type interface-number: Clears the bridged traffic statistics of the specified interface.
Examples
# Clear the bridged traffic statistics of bridge set 1.
<Sysname> reset bridge traffic bridge-set 1

reset counters interface

Use reset counters interface to clear statistics of the specified bridge-template interfaces.
Syntax
reset counters interface [ bridge-template [ interface-number ] ]
Views
User view
Default command level
2: System level
Parameters
interface-number: Specifies an interface by its number.
Usage guidelines
To collect statistics of an interface within a specific period, you must clear statistics of the interface before
starting statistics collection.
If you do not specify bridge-template, this command clears the statistics of all interfaces.
If you specify the bridge-template but not interface-number, this command clears the statistics of all
bridge-template interfaces.
If you specify both bridge-template and interface-number, this command clears the statistics of the
specified bridge-template interface.
Examples
# Clear statistics of interface bridge-template 1.
319