HP MSR series Command Reference Manual page 220

Without a PVC name or a VPI/VCI value pair specified, this command displays all the PVC information
on the specified ATM interface.
Examples
# Display the PVC information on all ATM interfaces.
<Sysname> display atm pvc-info
VPI/VCI | STATE
--------|---------|-----------|--------|--------|------|----------
1/32 |UP
1/33 |UP
1/55 |UP
2/66 |UP
Table 41 Command output
Field
VPI/VCI
STATE
PVC-NAME
INDEX
ENCAP
PROT
INTERFACE
# Display information about a specified ATM PVC.
<Sysname> display atm pvc-info interface atm 2/0 pvc 1/100
Atm2/0, VPI: 1, VCI: 100, INDEX: 0
AAL5 Encaps: SNAP, Protocol: IP
Service-type: CBR, output-pcr: 200 kbps, CDVT: 500 us
Transmit-Priority: 0
OAM interval: 0 sec(disabled), OAM retry interval: 1 sec
OAM retry count (up/down): 3/5
OAM ais-rdi count (up/down): 3/1
input pkts: 0, input bytes: 0, input pkt errors: 0
output pkts: 0, output bytes: 0, output pkt errors: 0
Interface State: UP, OAM State: UP, PVC State: UP
Output queue : (Urgent queuing : Size/Length/Discards)
Output queue : (Protocol queuing : Size/Length/Discards)
Output queue : (FIFO queuing : Size/Length/Discards)
OAM cells received: 42
F5 InEndloop: 0, F5 InAIS: 42, F5 InRDI: 0
OAM cells sent: 0
F5 OutEndloop: 0
OAM cell drops: 0
OAM CC State: No CC Alarm
| PVC-NAME | INDEX
|aa |33
|Sysname |34
|datacomm |56
| |68
Description
VPI/VCI value pair.
PVC state.
PVC name.
Internal index of the PVC.
AAL5 encapsulation type of the PVC.
Upper protocol running on the PVC.
Interface to which the PVC belongs.
| ENCAP | PROT | INTERFACE
|SNAP |IP
|MUX |None
|SNAP |PPP
|SNAP |IP
208
|Atm1/0 (UP)
|Atm1/0 (UP)
|Atm1/0.1 (UP)
|Atm1/0.4 (UP)
0/100/0
0/500/0
0/75/0