Dialer Timer Wait-Carrier - HP MSR series Command Reference Manual

Syntax
dialer timer idle seconds
undo dialer timer idle
Default
The link idle-timeout timer is 120 seconds.
Views
Dialup interface (physical or dialer interface) view
Default command level
2: System level
Parameters
seconds: Link idle-timeout timer, setting the time that a link is allowed to be idle. The value range is 0 to
65535 seconds.
Usage guidelines
A link idle-timeout timer starts upon setup of a link. If no interesting packets are present before the timer
expires, DCC disconnects the link.
If the timer is set to 0, the link will never be disconnected, regardless of whether there are interesting
packets on the link or not.
Examples
# Set the link idle-timeout timer to 50 seconds on interface Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] dialer timer idle 50

dialer timer wait-carrier

Use dialer timer wait-carrier to set the wait-carrier timer.
Use undo dialer timer wait-carrier to restore the default.
Syntax
dialer timer wait-carrier seconds
undo dialer timer wait-carrier
Default
The wait-carrier timer is 60 seconds.
Views
Dialup interface (physical or dialer interface) view
Default command level
2: System level
Parameters
seconds: Wait-carrier timer value, setting the time waiting for call setup. The value range is 0 to 65535
seconds.
177