X25 Alias-Policy - HP MSR series Command Reference Manual

Use undo x25 add-facility to disable the user facility adding function.
Syntax
x25 add-facility
undo x25 add-facility
Default
The user facility adding function is disabled.
Views
Interface view
Default command level
2: System level
Usage guidelines
This command is only applicable to the incoming packets on main interfaces. With the command, a
main interface checks incoming call setup negotiation packets for the window size and maximum packet
size fields. If the two fields are present, the packets are not processed. Otherwise, the two fields are
added to the packets.
Examples
# Enable the user facility adding function.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol x25 dce ietf
[Sysname-Serial2/0] x25 add-facility

x25 alias-policy

Use x25 alias-policy to configure the alias of an X.121 address.
Use undo x25 alias-policy to delete the alias of an X.121 address.
Syntax
x25 alias-policy match-type alias-string
undo x25 alias-policy match-type alias-string
Default
No x.25 alias is configured.
Views
Interface view
Default command level
2: System level
Parameters
match-type: Match type of the alias. The following match types are available:
free: Free match
•
free-ext: Extended free match
•
351