HP MSR series Command Reference Manual page 83

interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If only ISDN protocol is specified, this command displays the default system parameters of ISDN.
Examples
# Display the system parameters of the ISDN protocol DSS1.
<Sysname> display isdn parameters dss1
DSS1 ISDN layer 2 system parameters:
T200(sec)
1
DSS1 ISDN layer 3 system timers(default value):
Timer-Number
T301
T302
T303
T304
T305
T308
T309
T310
T313
T314
T316
T317
T318
T319
T321
T322
Table 12 Command output
Item
T200(sec)
T201(sec)
T202(sec)
T201(sec) T202(sec)
1 2
Value(sec)
240
15
4
30
30
4
90
40
4
4
120
10
4
4
30
4
T203(sec) N200
10 3
Description
Retransmit-timer (in seconds) of the L2 protocol of
ISDN.
TEI test request retransmit-timer (in seconds) of the L2
protocol of ISDN.
TEI request retransmit-timer (in seconds) of the ISDN L2
protocol.
71
K(Bri) K(Pri)
1 7