HP MSR series Command Reference Manual page 384
Layer 2 wan
Hide thumbs
Also See for MSR series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Parameters
x.121-address: Destination X.121 address, a pattern matching string with 1 to 15 characters. For the
specific description of mode matching, see
address should be exactly matched.
Table 80 X.121 mode matching rules
Wildcard
characters
*
+
^
$
\char
.
.*
.+
Table 81 Input rules of X.121 address mode matching string
Characters
*
+
\
^
-number: SVC route number.
sub-dest destination-address: Replaces the destination X.121 address, an alphanumeric string of 1 to 15
characters. The system replaces the destination DTE address in the call request packet with the
destination-address. If the destination address substitution pattern is not required to contain dots (.), up
carets (^), or dollar signs ($), see
If the destination address substitution pattern is required to contain these characters, follow these rules:
The destination address substitution pattern must start with an up caret and end with a dollar sign,
•
with the part in between being a digit string followed by a dot string. For example, it can be
^12..$ or ^1...$.
The destination X.121 address pattern and the destination address substitution pattern must be the
•
same. For example, if the destination address substitution pattern is ^1...$, the destination X.121
address pattern must be ^N...$, where N is an arbitrary number.
Matching rules
Matching zero or more previous characters
Matching one or more previous characters
Matching the beginning of the entered
characters
Matching the end of the entered characters
Matching a single character specified by
char.
Matching arbitrary single character
Matching arbitrary zero or more
characters
Matching arbitrary one or more characters
Input rules
Cannot be placed at the beginning of character string.
Cannot be placed after the symbol ^.
Cannot be placed before and after the symbols + and *.
Cannot be placed at the beginning of character string.
Cannot be placed after the symbol ^.
Cannot be placed before and after the symbols + and *.
Cannot be placed at the end of character string..
Cannot be placed before the symbols + and *.
Table 80
Table 80
and
Table
Example
fo*
fo+
^hell
ar$
\s
l.st
fo.*
fo.+
and
Table 81
for the destination X.121 address configuration.
372
81. If no wildcard is used, the X.121
Matchable character string
fo, foo, fooo
foo, fooo
hell, hello, hellaaa
ar, car, hear
bs
last, lbst, lost
fo, foo, fot
foo, fot, foot
Advertisement
Table of Contents
