Interface Mfr - HP MSR series Command Reference Manual

Field
Remove_link_ack(TX/RX)
Pkts dropped(in/out)
Timer: Ack 4
Hello 10
Retry: Max 2
Current 0
Cause code
Bundle Link fragment statistics
Mfr fragment(in/out)

interface mfr

Use interface mfr to create a multilink frame relay bundle interface or subinterface and enter its view.
Use undo interface mfr to delete a specified multilink frame relay bundle interface or subinterface.
Syntax
interface mfr { interface-number | interface-number.subnumber [ p2mp | p2p ] }
undo interface mfr { interface-number | interface-number.subnumber }
Default
A subinterface is point-to-multipoint.
Default
No multilink frame relay interface or subinterface exists.
Views
System view
Default command level
2: System level
Parameters
interface-number: MFR interface number.
interface-number.subnumber: MFR subinterface number, of which, interface-number is the main interface
number, and subnumber is the subinterface number in the range of 1 to 1023.
p2mp: Point-to-multipoint subinterface.
Description
Number of sent and received Remove_link_ack
messages.
Remove_link_ack messages notify receipt of the
Remove_link messages.
Number of dropped incoming and outgoing packets.
Time waiting for a Hello_ack message before a Hello
message or an Add_link message (for initial
synchronization) is retransmitted on the bundle link.
Intervals for sending Hello messages.
Maximum number of Hello or Add_link sending retries
made when no Hello_ack or Add_link_ack is received
on the bundle link.
Number of retries.
Cause resulting in the current state of the bundle link.
Fragment statistics on the bundle link.
Number of fragments sent/received by the bundle
link.
147