Display Isdn Active-Channel - HP MSR series Command Reference Manual

Examples
# Configure a 128 kbps leased line connection on interface BRI 2/0.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] dialer isdn-leased 128k

display isdn active-channel

Use display isdn active-channel to view the active call information on ISDN interfaces. If no interface is
specified, this command displays the active call information on all the ISDN interfaces.
Syntax
display isdn active-channel [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The output helps you troubleshoot ISDN calls.
Examples
# Display the active call information on interface BRI 2/0.
<Sysname> display isdn active-channel interface bri 2/0
Bri 2/0
Channel Info: B1
Call Property: Digital
Calling Number: -
Called Number: 6688164
UserName: -
Start Time: 05-04-30 14:27:52
Time Used: 00:04:34
Table 9 Command output
Field
Channel Info
Call Type: Out
Calling Subaddress: -
Called Subaddress: -
IP Address: -
Description
Information about the channel.
66