Ppp Mp Lfi Delay-Per-Frag - HP MSR series Command Reference Manual
Layer 2 wan
Hide thumbs
Also See for MSR series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Syntax
ppp mp lfi
undo ppp mp lfi
Default
LFI is disabled.
Views
Virtual template interface view, MP-group interface view, dialer interface view
Default command level
2: System level
Usage guidelines
Disabling LFI also removes the user-configured settings of maximum LFI fragment delay and size.
Examples
# Enable LFI on Virtual-Template1 interface.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp mp lfi
Related commands
ppp mp lfi delay-per-frag
•
ppp mp lfi size-per-frag
•
ppp mp lfi delay-per-frag
Use ppp mp lfi delay-per-frag to set the maximum delay for transmitting an LFI fragment.
Use undo ppp mp lfi delay-per-frag to restore the default.
Syntax
ppp mp lfi delay-per-frag time
undo ppp mp lfi delay-per-frag
Default
The maximum delay for transmitting an LFI fragment is 10 ms.
Views
Virtual template interface view, MP-group interface view, dialer interface view
Default command level
2: System level
Parameters
time: Maximum delay of an LFI fragment, in the range of 1 to 1000 ms.
Examples
# Set the maximum delay for transmitting an LFI fragment to 20 ms on Virtual-Template1 interface.
<Sysname> system-view
[Sysname] interface virtual-template 1
49
Advertisement
Table of Contents
