Dialer Isdn-Leased (Isdn Bri Interface View) - HP MSR series Command Reference Manual

Views
ISDN BRI interface view
Default command level
2: System level
Usage guidelines
When some applications require the ISDN BRI interface to be deactivated rapidly, you must disable
deactivation protection on the ISDN BRI interface.
Examples
# Disable deactivation protection for ISDN BRI Interface BRI 2/0.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0] undo deactive-protect

dialer isdn-leased (isdn bri interface view)

Use dialer isdn-leased 128k to configure a 128 kbps leased line connection.
Use undo dialer isdn-leased 128k to remove a 128 kbps leased line connection.
Use dialer isdn-leased number to configure a 64 kbps leased line connection.
Use undo dialer isdn-leased number to remove a 64 kbps leased line connection.
Syntax
dialer isdn-leased { number | 128k }
undo dialer isdn-leased { number | 128k }
Default
No ISDN leased line connection is configured.
Views
ISDN BRI interface view
Default command level
2: System level
Parameters
128k: 128 kbps ISDN leased line connection.
number: 64 kbps ISDN leased line connection. It can be 0 for the first B channel or 1 for the second B
channel.
Usage guidelines
You must manually remove the existing leased line configuration before switching from single B channel
leased line to 128 kbps leased line.
The dialer isdn-leased command is not available on BSV interfaces or the BRI interfaces of 2S1B
modules.
For more information about configuring ISDN leased lines on CE1/PRI and CT1/PRI interfaces, see the
dialer isdn-leased command in "DCC configuration commands."
65