Display Ppp Access-Control Interface - HP MSR series Command Reference Manual

display ppp access-control interface

Use display ppp access-control interface to display statistics about the dynamic firewalls on the VA
interfaces created based on the specified VT interface.
Syntax
display ppp access-control interface interface-type interface-number [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display statistics about the dynamic firewalls on the VA interfaces created based on VT 2.
<Sysname> display ppp access-control interface virtual-template 2
Interface: Virtual-Template2:0
User Name: mike
In-bound Policy: acl 3000
From 2000-04-29 18:47:05
0 packets, 0 bytes, 0% permitted,
0 packets, 0 bytes, 0% denied,
0 packets, 0 bytes, 0% permitted default,
0 packets, 0 bytes, 0% denied default,
Totally 0 packets, 0 bytes, 0% permitted,
Totally 0 packets, 0 bytes, 0% denied.
Interface: Virtual-Template2:1
User Name: tim
In-bound Policy: acl 3001
From 2000-04-30 18:41:05
0 packets, 0 bytes, 0% permitted,
0 packets, 0 bytes, 0% denied,
0 packets, 0 bytes, 0% permitted default,
0 packets, 0 bytes, 0% denied default,
Totally 0 packets, 0 bytes, 0% permitted,
Totally 0 packets, 0 bytes, 0% denied.
to 2000-04-29 18:47:16
to 2000-04-30 18:47:16
288