Display Fr Map-Info - HP MSR series Command Reference Manual

Field
status enquiry timeout = 0, discarded messages = 0

display fr map-info

Use display fr map-info to display all frame relay address mappings or the one for the specified
interface.
Syntax
display fr map-info [ interface interface-type { interface-number | interface-number.subnumber } ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type { interface-number | interface-number.subnumber }: Specifies an interface by its
type and number. It can be a main or subinterface. The interface-number argument is a main interface
number. The subnumber argument is a subinterface number, in the range 0 to 1023.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command displays whether the static address map entries are correct and whether dynamic address
mapping operates correctly.
Examples
# Display the frame relay address map table.
<Sysname> display fr map-info
Map Statistics for interface Serial2/0 (DTE)
DLCI = 100, IP INARP 100.100.1.1, Serial2/0
create time = 2002/10/21 14:48:44, status = ACTIVE
encapsulation = ietf, vlink = 14, broadcast
DLCI = 200, IP INARP 100.100.1.1, Serial2/0
create time = 2002/10/21 14:34:42, status = ACTIVE
encapsulation = ietf, vlink = 0, broadcast
DLCI = 300, IP 1.1.1.1, Serial2/0
create time = 2002/10/21 15:03:35, status = ACTIVE
encapsulation = ietf, vlink = 15
Description
Number of the Status-Enquiry messages that are timed
out and number of the discarded messages.
112