Mfr Configuration Commands; Bandwidth - HP MSR series Command Reference Manual

Views
Frame relay interface view, MFR interface view
Default command level
2: System level
Parameters
nonstandard: Nonstandard compatible compression format.
rtp-connections number1: Number of RTP compression connections, in the range 3 to 1000.
tcp-connections number2: Number of TCP compression connections, in the range 3 to 256. tcp-include:
Includes TCP header compression when performing RTP compression.
Examples
# Configure the number of RTP compression connections as 200 on the frame relay Serial 2/0.
<Sysname> system-view
[Sysname] interface serial2/0
[Sysname-Serial2/0] fr iphc rtp-connections 200
Related commands
fr map ip
•
• fr compression iphc

MFR configuration commands

bandwidth

Use bandwidth to set the intended bandwidth for an MFR interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
MFR interface view
Default command level
2: System level
Parameters
bandwidth-value: Intended bandwidth in the range of 1 to 4294967295 kbps.
Usage guidelines
You can obtain the intended bandwidth of an interface by using third-party software to query the value
of the MIB ifspeed.
The intended bandwidth of an interface is for the network management system to monitor the interface
bandwidth, and does not affect the actual bandwidth of the interface.
140