Shutdown; X25 Map Bridge - HP MSR series Command Reference Manual

<Sysname> reset counters interface bridge-template 1

shutdown

Use shutdown to shut down an interface.
Use undo shutdown to bring up an interface.
Syntax
shutdown
undo shutdown
Default
An interface is up by default.
Views
Bridge-template interface view
Default command level
2: System level
Examples
# Shut down bridge-template 1.
<Sysname> system-view
[Sysname] interface bridge-template 1
[Sysname-Bridge-template1] shutdown

x25 map bridge

Use x25 map bridge to create an X.121-to-bridging mapping.
Use undo x25 map bridge to remove an X25-to-bridging mapping.
Syntax
x25 map bridge x121-address x.121-address broadcast
undo x25 map bridge x121-address x.121-address
Default
No X.25-to-bridging mappings exist.
Views
Interface view
Default command level
2: System level
Parameters
x121-address x.121-address: Specifies the X.121 address of the peer host.
broadcast: Enables bridging of broadcasts to the X.25 destination.
Examples
# Create an X.25-to-bridging mapping on Serial 2/0.
320