Reset Attack-Defense Statistics Interface; Reset Attack-Defense Statistics Local - HP MSR Series Command Reference Manual

Predefined user roles
network-admin
network-operator
Parameters
policy-name: Specifies an attack defense policy by its name. The policy name is a case-insensitive string
of 1 to 31 characters. Valid characters include uppercase and lowercase letters, digits, underscores (_),
and hyphens (-).
ip: Clears flood attack detection and prevention statistics for IPv4 addresses.
ipv6: Clears flood attack detection and prevention statistics for IPv6 addresses.
Examples
# Clear flood attack detection and prevention statistics for IPv4 addresses in attack defense policy abc.
<Sysname> reset attack-defense policy abc flood protected ip statistics
# Clear flood attack detection and prevention statistics for IPv6 addresses in attack defense policy abc.
<Sysname> reset attack-defense policy abc flood protected ipv6 statistics
Related commands
display attack-defense policy ip
•
• display attack-defense policy ipv6

reset attack-defense statistics interface

Use reset attack-defense statistics interface to clear attack detection and prevention statistics for an
interface.
Syntax
reset attack-defense statistics interface interface-type interface-number
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
Examples
# Clear attack detection and prevention statistics for interface GigabitEthernet 2/1/1.
<Sysname> reset attack-defense statistics interface gigabitethernet 2/1/1
Related commands
display attack defense policy

reset attack-defense statistics local

Use reset attack-defense statistics local to clear attack detection and prevention statistics for the device.
634