<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] mtu 10000
Related commands
display interface tunnel
reset counters interface
Use reset counters interface to clear interface statistics.
Syntax
reset counters interface [ tunnel [ number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
tunnel: Specifies a tunnel interface.
number: Specifies the tunnel interface number. The number of tunnel interfaces that can be created is
restricted by the total number of interfaces and the memory.
The following matrix shows the value ranges for the number argument:
Hardware
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
Usage guidelines
Use this command to clear old statistics so you can observe new traffic statistics on a tunnel interface.
•
If you do not specify any parameters, this command clears statistics for all interfaces.
If you specify only the tunnel keyword, this command clears statistics for all tunnel interfaces.
•
If you specify both the tunnel keyword and the number argument, this command clears statistics for
•
the specified tunnel interface.
Examples
# Clear statistics for interface Tunnel 1.
<Sysname> reset counters interface tunnel 1
Related commands
display interface tunnel
Value range
0 to 1023
0 to 1023
0 to 1023
0 to 2047
0 to 4095
463