X25 Roa-List - HP MSR series Command Reference Manual

Examples
# Enable Serial 2/0 to accept the call with the reverse charging request user facility.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] x25 reverse-charge-accept
Related commands
x25 map

x25 roa-list

Use x25 roa-list to define ROA list.
Use undo x25 roa-list to delete ROA list items.
Syntax
x25 roa-list roa-name roa-id&<1- 1 0>
undo x25 roa-list roa-name
Default
No ROA list is defined.
Views
System view
Default command level
2: System level
Parameters
roa-name: Name of ROA, a string of 1 to 19 characters.
roa-id&<1- 1 0>: ROA ID in the range of 0 to 9999. You can specify 10 IDs for the ROA.
Usage guidelines
You can configure multiple (0 to 20. The maximum number of ROA lists supported by the system is 1,000)
ROAs. After configuring ROA, you can reference it by its name in the commands x25 call-facility or x25
map.
Examples
# Define two ROA lists, and apply them to the interfaces Serial 2/0 and Serial 2/1, respectively.
<Sysname> system-view
[Sysname] x25 roa-list list1 11 23 45
[Sysname] x25 roa-list list2 345
[Sysname] interface serial 2/0
[Sysname-Serial2/0] x25 call-facility roa-list list1
[Sysname-Serial2/0] quit
[Sysname] interface serial 2/1
[Sysname-Serial2/1] x25 call-facility roa-list list2
Related commands
• x25 call-facility
x25 map
•
369