Isdn Caller-Number; Isdn Calling - HP MSR series Command Reference Manual

isdn caller-number

Use isdn caller-number to configure the range of the numbers that the interface can receive.
Use undo isdn caller-number to delete the configured caller number.
Syntax
isdn caller-number caller-number
undo isdn caller-number
Views
ISDN interface view
Default command level
2: System level
Parameters
caller-number: Caller number that an incoming ISDN call can carry, which is a character string of 1 to
24 characters.
Examples
# Configure interface BRI 2/0 to receive only the incoming calls from caller number 400.
<Sysname> system-view
[Sysname] interface bri 2/0
[Sysname-Bri2/0]isdn caller-number 400

isdn calling

Use isdn calling to have the messages from a calling party to a called party carry the calling number.
This command mainly applies on ISDN interfaces. If a calling party has configured this command on its
BRI interface, the called party will be able to see the calling number by viewing the call history
information.
Use undo isdn calling to delete calling number in the messages that a calling party transmitted.
Syntax
isdn calling calling-number
undo isdn calling
Views
ISDN interface view
Default command level
2: System level
Parameters
calling-number: Calling number.
Examples
# Configure the message from a calling party to a called party on interface BRI 2/0 to carry calling
number.
<Sysname> system-view
76