HP MSR series Command Reference Manual page 253

Views
Any view
Default command level
1: Monitor level
Parameters
circuit-id: Specifies the ID of a DLSw virtual circuit, in the range of 0 to 0xFFFFFFFF.
remote ip-address: IP address of the remote DLSw peer.
verbose: Displays the detailed information of the virtual circuits.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the information of all virtual circuits.
<Sysname> display dlsw circuits
circuit-Id
00a2000a
# Display information of the virtual circuits established with the remote peer with IP address 2.2.2.2.
<Sysname> display dlsw circuits remote 2.2.2.2
Circuit-id
1e0001
Total number of circuits: 1
# Display the detailed information about the virtual circuits.
<Sysname> display dlsw circuits verbose
Circuit-id: 1e0001
Local-MAC: 1400-0000-0000
Local-SAP: 4
Port: Eth1/1
Remote peer: 2.2.2.2
FC: OutWin: 40
Info-Frame:
Total number of circuits: 1
Table 49 Command output
Field
circuit-Id
port
local-MAC
remote-MAC
port local-MAC
04 0000.1738.6dfd
Port Local-MAC
Eth1/1 1400-0000-0000
Transmit: 0
remote-MAC
0000.1722.3435
Remote-MAC
0a00-0000-0000
Lifetime: 00:06:30
Remote-MAC: 0a00-0000-0000
Remote-SAP: 4
Direction: ORIGIN
PT: 80 InWin: 40
Receive: 0
Description
Virtual circuit ID.
Port number used for TCP connection.
MAC address of the local peer of the virtual circuit.
MAC address of the remote peer of the virtual circuit.
241
state lifetime
CONNECTED 10:02:23
State
CONNECTED
GT: 200
Drop: 0
Lifetime
00:00:40