HP MSR series Command Reference Manual page 259

include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
With the ip-address argument provided, this command displays the information about the specified
remote DLSw peer.
Without the ip-address argument provided, this command displays the information about all remote
DLSw peers.
Examples
# Display information about all the current remote peers.
<Sysname> display dlsw remote
Remote peer type: D--Learning Dynamic
Total peers number:5
IP Address
*128.10.45.10
128.10.46.78
*130.20.45.12
130.35.46.77
*145.11.23.58
Table 54 Command output
Field
Remote peer type
Total peers number
IP address
frame-in
frame-out
frame-drop
port
type
state
lifetime
C--Configured by user
frame-in frame-out frame-drop
0 0
2 2
2 2
0 0
2 1
port type
0 2065
0 2065 C
0 2067
0 2067 C
1 2067
Description
Type of the remote peer:
•
D—The remote peer was dynamically learned.
•
C—the remote peer was manually configured.
Total number of remote peers.
Remote peer IP address. If preceded by an asterisk (*),
this remote peer can establish a connection.
Otherwise, this remote peer is inactive and only serves
as a backup.
Number of frames the local peer has received from
this remote peer.
Number of frames the local peer has sent to this
remote peer.
Number of frames dropped due to errors when the
local peer sent/received frames to/from this remote
peer.
Port number for the TCP connection:
•
2065—DLSw v1.0
•
2067—DLSw v2.0
Type of the remote peer.
Status of the connection.
Length of time for which the connection has been up.
247
state lifetime
C CONNECT 00:00:00
DISCONNECT 00:00:00
D CONNECT 00:02:00
DISCONNECT 00:00:00
C CONNECTING 00:00:00